Wednesday, May 30, 2012

How to Lock a Linksys Wi-Fi Router

Locking a Linksys router is the process that prevents unknown users from accessing your Wi-Fi connection without your approval. To lock a Linksys wireless router, you will need to password-protect it. It will help prevent unauthorized users from hacking your wireless network and stealing your bandwidth. You can prevent access to your wireless network from hackers in two ways: changing the username and password associated with the Linksys router setup utility and securing the router by requiring a WEP (Wired Equivalent Privacy) password(see also:How to Reset Admin Password in a Linksys Router). Follow the given steps to lock your Linksys wireless router.

Step1: Open your web browser and enter the default IP address is 192.168.0.1 in the address bar. Press the Enter key to continue.

Step2: In the pop-up box, enter “admin" into the username field and press enter to access the GUI (graphic user interface)-based Linksys setup window.

Lock a Linksys Wi-Fi Router Step3: Select the "Administration" tab on the GUI. Enter a new username in the box next to "Gateway User Name" and type a new password in the field next to "Gateway Password." Re-enter the password in the "Re-enter to confirm" box. Click on the "Save Setting" button located at the bottom of the page. When the page reloads, you are prompted to enter the new username and password to gain access to the GUI again. Your Linksys router is secured now.


Step4: To enable the WEP encryption, click the “Wireless" tab on the GUI and then select "Wireless security." Select WEP from the drop-down menu. When prompted, enter your password in the Password field.

Step5: After completing all the steps, go to the bottom of the page and click on the “Save Settings” button. Next time, you will use this password to connect your computer to the wireless network.

Note: To get more help on linksys router ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

If you want to setup a linksys router,follow this blog-How to Set up a Linksys Wireless Router.

Monday, May 28, 2012

How to Manually Configure a Linksys E3000

Manually Configure a Linksys E3000
The Linksys E3000 comes with a CD containing the Cisco Connect software. This software is inserted after you connect the router to the PC, and automatically sets up the router to use your Internet connection without manual access to the router. If you do not have the CD or have damaged it, you can still set up the router to work with your network, as well as your Internet connection.
If you want to reset linksys password then follow this blog-How to reset a LinkSys Router password.

Step1: Open any Web browser on your computer, and type "192.196.1.1" into your browser's address field.

Step2: Log in to the router at the prompt by entering "admin" in both the username and password fields that appear, and then click "OK" to enter the router main menu.

Step3: Click on "Automatic Configuration - DHCP" at the "Internet Connection type" field box.

Step4:  Enter the username and password your ISP assigned to you in the respective fields below the "Internet Connection Type" box.

Step5:  Click "Save Changes" to save the router settings. The router connects to the Internet automatically.

Note: For any tech support on linksys router ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.
 
See also: How to Disable DHCP on a Linksys Router..

Friday, May 25, 2012

How to Disable the Netgear DG834G Firewall

Disable the Netgear DG834G Firewall
In netgear DG834G router have a built-in firewall feature that prevents unauthorized users from connecting to your home network or accessing your computer's data. Sometimes firewall connection does not allow accessing software in your computer system and that time you may need to disable the firewall connection. To disable the firewall connection, you need some manual changes. Follow the given steps to disable the netgear DG834G firewall.

If you want to setup netgear router then follow this article-How to Setup Netgear Router.

Step1: open your web browser and type "http://192.168.0.1” to access the Netgear router's admin menu. Type the router's user name and password. If you haven't already changed the settings, enter "admin" for the user name and "password" for the password.

Step2: Click "OK."  And then click the "Security" option at the left end of the window, and then select "Firewall Rules." Select the "Add" button underneath the "Inbound" heading.

Step3:  Click on the "Any" option from the "Service" list and choose the "Allow Always" option in the "Action" list. Click "Apply" to set the new rule as active.

Step4:  Click on the "WAN Setup" option under “Advanced" heading at the left end of the window. Click the check box labeled "Disable Port Scan and DOS protection."

Step5: After completing the all above steps, click on apply button and then logout to disable the Netgear DG835G's firewall.
If you want to configure netgear DG834G router, follow this blog -How to Configure NetGear DG834G.

Note:To get netgear tech support,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.


Monday, May 21, 2012

How to Install the Netgear WPN824 router

install netgear wpn824 router
Netgear is a popular manufacturer of wireless routers; it is used to create a network for your home or office. A router can also be used for a wireless connection if you need to connect to the Internet with a laptop computer. In order to use a Netgear router, such as the MPN824, it will need to be connected to your main desktop computer with the proper software installed.

If you want to change security setting in netgear router then follow this blog-How to Change the Security Settings on a Netgear Wireless Router.

Step1: Plug in the power cord into the power jack on the back of the router and Plug the other end of the power cable into the wall outlet.

Step2:  Unplug the ethernet cable from your cable or DSL modem. Plug the ethernet cable into the "Internet" port on the router.

Step3: Plug one end of the ethernet cable into a "LAN" port on the back of the router. Plug the other end of the cable into the ethernet port on the computer.

Step4: Insert the installation CD into the CD/DVD drive and wait for the setup screen to appear. Click the "Setup" button and then follow the instructions on the screen to install the software. Choose a name for your network and select a password that consists of letters and numbers.

Step5: Press the "Power" button on the front of the router to turn it on. Observe the lights on the front of the router for a proper connection. The Internet port should light up, along with a LAN port and the light for wireless.

The setting up of Wi-Fi is a very simple process, if done under the guidance of an expert.If you want to get the the process of netgear router setting then follow this article-How to Setup Netgear Router.


Note:To get technical support on netgear router ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.
 

Friday, May 18, 2012

How to Reset Netgear Router

reset netgear routerNetgear routers are very popular high speeds wireless router.When you just forgot your own netgear router password, you can reset it and start over. This is not a difficult problem, so netgear has made resetting and restarting their routers a simple task. Follow the given steps to reset netgear routers.
If you want to configure a netgear model DG834GT , follow my blog-How to Configure a Netgear DG834GT.

Step1: Connect all of your devices. Your netgear router should be connected.one Ethernet cable connecting it to your computer and a second Ethernet cable connecting it to your computer's modem.

Step2: Find the reset button on the rear of your Netgear router. The reset button is a small inset button and requires a pointed object to reach it. Use a fine-tipped pen to hold the button down for at least 10 seconds. The test light should flash during this process.

Step3: After completing the above steps, open your Internet browser and enter the Netgear router's IP address into the address bar to access the router's information. Generally, Netgear routers use the IP address 192.168.0.1.

Step4: Attempt to log in to the router with the default username and password. The default username is "admin" and the default password is "password." If the router's username and password were not cleared away, unplug the router and try holding down the reset button. While you are holding down the reset button, plug the router back in.

Step5:  Now log in to the router using the default "admin" username and "password" as the password. You can now reset your information, rename your router and enter your own username and password.

If you want to setup netgear wireless router without installation disc then follow this article-How to Setup Without Installation Disc.

Note:If you are facing problem with your netgear Router Setup and Configuration, You can reach V tech-squad online technical support at their Toll Free No +1-877-452-9201. 

Wednesday, May 16, 2012

How to Configure Linksys RE1000 Range Expander Manually

Increase the range of your wireless network and patch up "dead" or slow spots in your network with a Linksys wireless range expander. The Linksys RE1000 Wireless-N Extender lets you repeat the wireless signal of any Access Point or Router to provide Internet connectivity in hard to reach areas via a wired or wireless connection. The Linksys RE1000 acts as an extension to your router or access point so you can connect multiple devices to it.
Linksys RE1000 wireless-N range extender can be set up manually by accessing its web-based set up page, by using the Cisco Connect software if you have it installed in your computer, by using the setup CD that comes with the device or using the Wi-Fi Protected Setup on the RE1000 if your router also supports WPS feature.
If you want to reset admin password in linksys router then follow this article-How to Reset Admin Password in a Linksys Router.
Configure Linksys RE1000 Range Expander Manually
How to Access the Web UI of RE1000
The default IP Address of the Expander is 192.168.1.1 accessible only using the 2 method:

1. Using an Ethernet Cord, connect the expander directly to your computer. This type of connection is highly recommended for a more stable connectivity to the RE1000.
  •  Open a browser and access 192.168.1.1 (no username and password is admin).
  •  Go to the Basic Wireless settings tab to configure your SSID and Security.

***The SSID and network key or password is case sensitive. If your range expander’s Channel settings do not match with the router’s Channel, the range expander may not work. The SSIS should also be with the same with the router.
  • Save the settings
2. Direct Wireless Connection
Using your computer’s wireless capability; look for the default Network Name (SSID). Connecting to the range extender’s default Network Name (SSID) will enable your computer to communicate with the extender wirelessly.
NOTE: The default SSID of your Linksys range extender is LinksysExtenderXXXXX. Where XXXXX is the last five digits of its serial number.

If you want to configure linksys WRT54G router then follow my blog-How to configure linksys WRT54G.

Note: To get linksys tech support,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

Monday, May 14, 2012

How to Reinstall My Linksys Router without Disc

reinstall linksys router without disk
Linksys wireless routers enable Internet connection sharing. When a Linksys router is connected to a high-speed Internet connection, such as a cable or DSL modem, multiple computers connecting to the router can access the Internet simultaneously. You can reset the Linksys router back to its default factory settings and reinstall it into the local computer network without the installation disc. On the back of the router is a reset button that enables this process.
The most popular consumer routers are Linksys WRT54G broadband router ,if you want to configure linksys WRT54G router then follow my blog-How to configure linksys WRT54G .

Step1: Unplug the power from the Linksys router.

Step2: Hold in the reset button and plug the power back in.

Step3: Continue holding the reset button for 30 seconds, and then release it.

Step4: Wait 30 seconds and then unplug the power from the Linksys router again.

Step5: Plug the power back in and wait another 30 seconds. At this point, the router can participate on a wired network without any additional setup. If wireless settings need to be configured, proceed with the remaining steps.

Step6: Open an Internet browser on a computer that is directly connected to the router with an Ethernet cable.

Step7: Type 192.168.1.1 into the address bar and press "Enter."

Step8: In login page, leave the username blank and enter "admin" without quotes for the password. Press "Enter."

Step9: Click on Wireless. Enter a wireless network name (SSID). Click "Apply" to save the changes.

Step10: Click "Wireless Security." Choose an encryption type, such as WPAv2, and enter a password to be used on the wireless network.

Step11: And finally clicks apply to complete the settings.

If you want reset the linksys router password then follow this article-How to Reset Password in Linksys Wireless Router.

To get technical support on linksys router ,you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.


Popular Posts